Derivatization procedures for the detection of estrogenic chemicals by gas chromatography/mass spectrometry

This work evaluated derivatization procedures for detecting both natural and synthetic estrogenic chemicals by gas chromatography/mass spectrometry (GC/MS). Different silylating agents, mainly trimethylsilylating (TMS) agents, were compared, and the roles of various content of trimethylchlorosilane (TMCS, as a stimulator) were investigated. The difference in the abundances of the derivatives was caused by the steric hindrance of multiple hydroxyl groups and ethynyl groups in the structures of estrogenic chemicals. The use of TMCS produces an increase in the derivatization yield, especially for the compounds with multiple hydroxyl groups (i.e., 17beta-estradiol (E(2)) and estriol (E(3))). Mass spectra of O-TMS derivatives and tentative fragmentation profiles are proposed. Molecular ions were the base peaks for all the derivatives, and were used as the quantitation ions to obtain maximum detection sensitivity and specificity. Sample enrichment was achieved by Oasis HLB solid-phase extraction cartridges. The quantitation limits of these compounds ranged from 5 to 10 ng/L in 1000-mL water samples. Recovery of the estrogenic chemicals in spiked various water samples ranged from 78 to 102% while relative standard deviation (RSD) ranged from 1 to 15%.     

Chlorinated briarane-type diterpenoids from the gorgonian coral Ellisella robusta (Ellisellidae)

Four chlorinated metabolites featuring briarane carbon skeletons have been isolated from the gorgonian coral Ellisella robusta, which was collected off the coast of southern Taiwan: two new natural products, robustolides D (1) and E (2), and two known metabolites, robustolides F (3) and G (4). The structures of metabolites 1–4 were determined by spectroscopic methods, using 1D and 2D NMR in particular. The structures and absolute stereochemistry of robustolides D (1), F (3), and G (4) were directly established by X-ray diffraction analysis. Robustolide D (1) is the first metabolite of briarane-related natural products found to possess two halogen atoms.     

catena‐Poly­[[tetra­aqua­iron(II)]‐μ‐succinato‐κ2O:O′]

The title complex, {[Fe(C₄H₄O₄)(H₂O)₄]}_n, is an infinite poly­meric compound bridged by the succinate dianion. Two carboxyl­ate groups coordinate in a monodentate manner to the Fe^II atom, in a trans fashion, with an O—Fe—O bond angle of 175.72 (6)° and Fe—O distances of 2.0886 (14) and 2.1008 (15) Å. One of the uncoordinated carboxyl­ate O atom forms an intramolecular hydrogen bond with a coordinated water mol­ecule. Extensive hydrogen bonding between parallel poly­meric complex chains results in a three‐dimensional supramolecular structure.     

Dinitrosyl iron complexes (DNICs) [L(2)Fe(NO)2]- (L = thiolate): interconversion among {Fe(NO)2}9 DNICs, {Fe(NO)2}10 DNICs, and [2Fe-2S] clusters, and the critical role of the thiolate ligands in regulating NO release of DNICs

Dinitrosyl iron complex [(-SC(7)H(4)SN)(2)Fe(NO)(2)](-) (1) was prepared by reaction of [S(5)Fe(NO)(2)](-) and bis(2-benzothiozolyl) disulfide. In synthesis of the analogous dinitrosyl iron compounds (DNICs), the stronger electron-donating thiolates [RS](-) (R = C(6)H(4)-o-NHCOCH(3), C(4)H(3)S, C(6)H(4)NH(2), Ph), compared to [-SC(7)H(4)SN](-) of complex 1, trigger thiolate-ligand substitution to yield [(-SC(6)H(4)-o-NHCOCH(3))(2)Fe(NO)(2)](-) (2), [(-SC(4)H(3)S)(2)Fe(NO)(2)](-) (3), and [(SPh)(2)Fe(NO)(2)](-) (4), respectively. At 298 K, complexes 2 and 3 exhibit a well-resolved five-line EPR signal at g = 2.038 and 2.027, respectively, the characteristic g value of DNICs. The magnetic susceptibility fit indicates that the resonance hybrid of {Fe(+)((*)NO)(2)}(9) and {Fe(-)((+)NO)(2)}(9) in 2 is dynamic by temperature. The IR nu(NO) stretching frequencies (ranging from (1766, 1716) to (1737, 1693) cm(-)(1) (THF)) of complexes 1-4 signal the entire window of possible electronic configurations for such stable and isolable {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-). The NO-releasing ability of {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) is finely tuned by the coordinated thiolate ligands. The less electron-donating thiolate ligands coordinated to {Fe(NO)(2)}(9) motif act as better NO-donor DNICs in the presence of NO-trapping agent [Fe(S,S-C(6)H(4))(2)](2)(2-). Interconversion between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(10) [(Ph(3)P)(2)Fe(NO)(2)] was verified in the reaction of (a) [(RS)(2)Fe(NO)(2)](-), 10 equiv of PPh(3) and sodium-biphenyl, and (b) 2 equiv of thiol, [RS](-), and [(Ph(3)P)(2)Fe(NO)(2)], respectively. The biomimetic reaction cycle, transformation between {Fe(NO)(2)}(9) [(RS)(2)Fe(NO)(2)](-) and {Fe(NO)(2)}(9) [(R'S)(2)Fe(NO)(2)](-), reversible interconversion of {Fe(NO)(2)}(9) and {Fe(NO)(2)}(10) DNICs, and degradation/reassembly of [2Fe-2S] clusters may decipher and predict the biological cycle of interconversion of {Fe(NO)(2)}(9) DNICs, {Fe(NO)(2)}(10) DNICs, and the [Fe-S] clusters in proteins.     

Synthesis and Molecular Recognition of Molecularly Imprinted Polymer with Ibuprofen as Template

Ibuprofen and ketoprofen are chemically similar non‐steroidal anti‐inflammatory drugs widely used in the treatment of arthritis. Using a molecular imprinting technique, a simple and rapid method was developed for the simultaneous separation and determination of ibuprofen and ketoprofen. Molecular imprinting introduces artificial binding sites into a synthetic polymer matrix, allowing it to exhibit selective rebinding of template molecules. Imprinted polymers can be regarded as an HPLC stationary phase, important for pharmaceutical analysis. Most molecularly imprinted polymers (MIPs) are synthesized by free radical polymerization of functional monomers, resulting in an excess of crosslinking monomers. In this study, MIPs have been prepared with a ibuprofen template, which can form intramolecular hydrogen bonds. Methacrylic acid (MAA) and ethyleneglycol dimethacrylate (EGDMA) were used as the functional monomer and cross‐linker, respectively. Bulk polymerization was carried out at 4 °C under UV radiation. The resulting MIP was ground into 25?44 μm particles, which were slurry‐packed into analytical columns. Template molecules were removed by methanol‐acetic acid (9:1, v/v). We evaluated the template binding performance of the MIP using HPLC, with ultraviolet (UV) detection at 234 nm. Chromatographic resolution of ibuprofen and ketoprofen on the MIPs were appraised using buffer/acetonitrile (45/55, v/v) as the mobile phase. Results show that the MIPs prepared using ibuprofen as the template had a significant molecular imprinting effect. The method was successfully applied to the separation and analysis of ibuprofen and ketoprofen in pharmaceuticals.     

Simultaneous determination of selenium and antimony compounds by capillary electrophoresis with indirect fluorescence detection

Capillary electrophoresis (CE) with indirect fluorescence detection was used to analyze selenium (selenite, selenate, selenomethionine, and selenocystine) and antimony (antimonite and antimonate) compounds. The separation was achieved by CE in 6 min with a 1.2 mM fluorescein solution at pH 9.5. Fluorescein also functioned as a background fluorophore for the indirect detection of these nonfluorescent species. Linearity of more than two orders of magnitude was generally obtained. Precision of migration times and peak areas was less than 1.0% and 7.2%, respectively. The concentration limits of detection (CLODs) was in the microM range. The detection sensitivity was generally dependent upon the transfer ratio (TR, defined as the number of moles of fluorescein ions displaced by one mole of analyte ions) of each species.     

Influence of catalyst depletion or deactivation on polymerization kinetics. III. Solution polymerization of acrylonitrile in N,N-dimethylformamide at −30°C.

The experimental results on homogeneous polymerization of acrylonitrile initiated with the sodium triethylthioisopropoxyaluminate, NaAlEt₃S(i-Pr), catalyst in DMF at ?30°C. are compared with the prediction of equations based on a postulated mechanism. The agreement between the calculated and observed number-average molecular weight combined with the kinetic data and the relationship between the conversion and the initial catalyst concentration provides a rigorous test concerning the validity of the equations and the mechanism of the polymerization. A plausible mechanism is postulated as follows: The initiation must be relatively fast in accordance with the rate equations and the growing polymer undergoes propagation, transfer (to monomer), and deactivation simultaneously. The infrared spectrum of the low molecular weight polymer prepared at a high catalyst concentration showed strong absorption at 2337, 2205, and 1620 cm.^?1 but no absorption at 900 cm.^?1, indicating that there are two nitriles in the polymer, one of which is conjugated. The possibility of having ? CH?CH₂ groups in the polymer is ruled out by the absence of the band at 900 cm.^?1. In view of these facts, it is concluded that the polymer has a ? CH?CHCN endgroup resulting from the transfer reaction.     

Analysis of ephedra-alkaloids using sweeping and cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography methods

Two stacking methods of capillary electrophoresis (CE) were developed for the separation of very dilute solutions of ephedra-alkaloids, namely ephedrine, pseudoephedrine, methylephedrine, methylpseudoephedrine, norephedrine, and norpseudoephedrine. A sweeping method which uses a carrier comprised of phosphoric acid, sodium dodecyl sulfate (SDS), diethylamine and acetonitrile permits the detection of the alkaloids down to the 10(-1) microg/mL level, and the cation-selective exhaustive injection and sweeping micellar electrokinetic chromatography (CSEI-Sweep-MEKC) method using phosphoric acid, SDS, and acetronitrile as electrolytes can detect down to the 10(-3) microg/mL level. The former requires the conductance of the sample solution to be adjusted beforehand, and only five peaks were observed, two of which were overlapped. The latter is capable of separating the six alkaloids but has a somewhat poorer reproducibility. Using an optimized injection time, it was found that the more diluted a solution is, the greater the sweeping effect will be. The CSEI-Sweep-MEKC method with a 600 s injection time and a 10(-1) microg/mL solution concentration provides an amplification effect of approximately 10(4). The method is suitable for analyses of dilute herb drug extracts and mouse sera. The effect of buffers on the separation and validation of the methods in this study are also discussed.     

Synthesis of an s-butyldibenz[a,h]acridine. Alkyl migration in the bernthsen reaction

The Bernthsen reaction between N-1-naphthyl-2-naphthylamine and 2-methylbutanoic acid and its anhydride at 200–230° for seven hours gives a low yield of 12- or 13-s-butyldibenz[a,h]acridine, instead of the expected 14-isomer. The parent molecule dibenz[a,h]acridine results from the same reaction conducted at 270° for thirteen hours. It is suggested that alkyl migration may have occurred in some other cases where the Bernthsen reaction was reported to yield 14-alkyldibenz[a,h]acridines.